Interlogix Simon XT Tabletop Installation Manual - Manual (Page 78)

Chapter 6:
72 Simon XT TableTop Control Panel Installation Manual
Unplug nearby equipment that may be causing interference (light dimmer
switches, televisions, appliances with older motors).
Check that the switch on the lamp or appliance is turned on and remains on.
Make sure the lamp has a working bulb.
Make sure the lamp or appliance is plugged into the lamp/appliance module,
the module is plugged into the outlet and the outlet is not controlled by a
switch.
Make sure the housecode and unit code are correct.
Move the module to a different outlet that is on the same phase (branch) of
the household electrical circuit as the panel.
• Time- or sensor-activated light not working.
Make sure you have programmed the light to be activated by a timer or
sensor.
Make sure the system clock is set.
Make sure these functions have been enabled. The functions are enabled if
the appropriate icon is shown on the display.
Contacting us
For help installing, operating, maintaining, and troubleshooting this product, refer
to this document and any other documentation provided. If you still have
questions, contact us during business hours (Monday through Friday, excluding
holidays, between 5 a.m. and 5 p.m. Pacific Time).
Table 34: Technical support
North America Latin America
Toll-free: 888.437.3287 in the US
including Alaska, Hawaii, Puerto Rico,
and Canada.
www.utcfireandsecurity.com or
www.interlogix.com
T: 305.593.4301
F: 305.593.4300
W: www.utcfireandsecurity.com or
www.interlogix.com
Eurpoe, Middle East, and Africa
W: www.utcfireandsecurity.com or
www.interlogix.com