Interlogix Simon XT Tabletop Installation Manual - Manual (Page 39)

Chapter 4:
Simon XT TableTop Control Panel Installation Manual 33
Control Description
LCD display The LCD module has a 2 x 16 character array that displays a variety of
phrases and icons.
Doors+Windows Press to arm perimeter sensors.
Motions Press to arm interior sensors.
Disarm Press to turn off intrusion/burglary protection for your system. Only
intrusion/burglary sensors such as doors, windows, and motion sensors are
disarmed. Environmental sensors, such as smoke and carbon monoxide,
stay active at all times.
Status Press to determine system status.
Silent Press to silence exit beeps when arming.
Bypass Press to bypass a sensor.
Police
Press and hold the Police button for two seconds (or press twice quickly) to
call the central monitoring station and notify them of a nonmedical call for
help.
Emergency
Press and hold the Emergency button for two seconds (or press twice
quickly) to call the central monitoring station and notify them of a
nonmedical call for help.
Fire
Press and hold the Fire button for two seconds (or press twice quickly) to
call the central monitoring station and notify them of a fire call for help.
Microphone Used to communicate with central monitoring station after an alarm.
Scroll up/scroll
down Press to scroll through lists of similar items.
Enter Press to select a particular menu item or commit to memory a menu item
that has just been programmed.
Numeric keypad Twelve-key telephone-type keypad (0 through 9, *, #) for entering access
codes or other numerical data.
Speaker Provides voice output and sounds key beeps. The panel speaks arming
level changes, system status, and voice chime sensor trips. The panel voice
is also used for voice reporting and remote phone control.
* Lights on.
# Lights off.
Entering and exiting the system menu
To enter the system menu, press either the scroll up/down or enter buttons in the
upper right of the panel.
Press the Status button to exit a menu or option edit mode and navigate up one
level. Pressing the Status button while in the top menu level exits the system
menu level. The panel automatically exits the system menu after a few seconds