Interlogix Simon XT Tabletop Installation Manual - Manual (Page 58)

Chapter 4:
52 Simon XT TableTop Control Panel Installation Manual
Function Default Description
Alarm report
verify Off This option determines whether the panel verifies successful alarm
reports to the central station by displaying Phone comm is OK (on), or
not (off).
Piezo beep options
Table 22 below provides piezo beep option details.
Table 22: Panel piezo beeps
Activity Piezo beep response
Arm doors and
windows Exit delay —two beeps sound every five seconds and two times per second
during the last ten seconds.
Silent exit —two beeps sound at the beginning of the exit delay and two more
sound just before the exit delay expires.
Entry delay —two beeps sound every five seconds and two times per second
during the last ten seconds.
Arm motion
sensors Exit delay — three beeps sound every five seconds and three times per second
during the last ten seconds.
Silent exit — three beeps sound at the beginning of the exit delay and three more
sound just before the exit delay expires.
Entry delay — three beeps sound every five seconds and three times per second
during the last ten seconds.
Arm
doors/windows
and motion
sensors Exit delay — four beeps sound every five seconds and four times per second
during the last ten seconds.
Silent exit — four beeps sound at the beginning of the exit delay and four more
sound just before the exit delay expires.
Entry delay — four beeps sound every five seconds and four times per second
during the last ten seconds.
Disarm One beep
Chime Two beeps (when programmed)
Special chime Three beeps (when programmed)
Trouble beeps Six beeps every minute. Press Status to stop beeps for four hours.
No activity Twenty beeps every minute for five minutes (when programmed)
Audio verification options
Table 23 on page 53 provides audio verification option details.