Interlogix Simon XT Tabletop Installation Manual User Manual
Page 63
Chapter 4:
Simon XT TableTop Control Panel Installation Manual
57
6. Power up the panel with the battery and then the AC transformer.
Note: The procedure to reset memory to factory defaults is meant to be
difficult.
To program the panel, do the following:
1. Set the panel clock.
2. Add (learn) sensors.
3. Set the housecode and light and appliance controls (entry/exit activated
lights, sensor-activated lights, time-activated lights).
4. Change options as needed.
If the phone lock is on, the following features will not reset to factory defaults:
• Phone numbers 1 and 2
• Downloader phone number
• Account number
• Phone lock
• Downloader code
• Phone report mode 1
• Phone report modes 1 to 4
• Access code length
• Call waiting
• Dealer code