Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 73)

-73-
Permit
Usage Guide:
To configure Permit for the ACL action.
Example:
To configure Permit ACL action for the GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # access-list action permit
4.2.48.2 access-list action deny
Command:
access-list action deny
action
Access list action
Default:
Deny
Usage Guide:
To configure Deny for the ACL action.
Example:
To configure Deny ACL action for the GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # access-list action deny
4.2.48.3 access-list logging
Command:
access-list logging
logging Log ging frame information. Note: The logging feature onl y works when the packet length is les s than
1518 (without VLAN tags) and the System Log memory size and logging rate is limited.
Default:
Disable
Usage Guide: