Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 278)

-278-
Switch (config)# snmp-server host interlogix
Switch (config-snmps-host)# shutdown
4.2.175.8 traps
Command:
traps [ aaa authentication ] [ system [ coldstart ] [ warmstart ] ] [ switch [ stp ]
[ rmon ] ]
traps
trap event configuration
aaa
AAA event group
authentication
Authentication fail event
switch
Switch event group
system
System event group
coldstart
Cold start event
warmstart
Warm start event
rmon
RMON event
stp
STP event
Default:
Disabled
Usage Guide:
To configure Trap event of SNMP
Example:
To configure Trap event (STP, RMON) of SNMP
Switch# configure terminal
Switch (config)# snmp-server host interlogix
Switch (config-snmps-host)# traps switch rmon stp
4.2.175.9 version
Command:
version { v1 [ ] | v2 [ ] | v3 [ probe | engineID