Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 135)

-135-
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # speed 1000
4.2.48.117 switchport access vlan
Command:
switchport access vlan
switchport
Switching mode characteristics
access
Set access mode characteristics of the interface
vlan
Set VLAN when interface is in access mode
VLAN ID of the VLAN when this port is in access mode
Default:
1
Usage Guide:
To configure access VLAN ID for specific interface
Example:
To configure access VLAN ID (5) for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # switchport access vlan 5
4.2.48.118 switchport forbidden vlan add
Command:
switchport forbidden vlan add
switchport
Switching mode characteristics
forbidden
Adds or removes forbidden VLANs from the current list of forbidden VLANs
vlan
Add or modify VLAN entry in forbidden table.
add
Add to existing list.
VLAN IDs