Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 150)

-150-
ip Interface Internet Protocol config commands
address
Address configuraton
dhcp
Enable DHCP
DHCP fallback address
DHCP fallback netmask
Default:
None
Usage Guide:
To configure DHCP fallback IP address for specific VLAN
Example:
To configure DHCP fallback IP address (192.168.1.10/24) for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip address dhcp fallback 192.168.1.10 255.255.255.0
4.2.49.7 ip dhcp server
Command:
ip dhcp server
ip Interface Internet Protocol config commands
dhcp
Configure DHCP server parameters
server
Enable DHCP server per VLAN
Default:
None
Usage Guide:
To enable IPv4 DHCP Server for specific VLAN
Example:
To enable IPv4 DHCP Server for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip dhcp server