Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 319)

-319-
---------------------
GigabitEthernet 1/1 access-list action is permit
GigabitEthernet 1/1 access-list policy ID is 0
GigabitEthernet 1/1 access-list rate limiter ID is disabled
GigabitEthernet 1/1 access-list redirect is disabled
GigabitEthernet 1/1 access-list logging is disabled
GigabitEthernet 1/1 access-list shutdown is disabled
GigabitEthernet 1/1 access-list port-state is enabled
GigabitEthernet 1/1 access-list counter is 0
4.20.4 show access-list
Command:
show access-list [ interface [ ( [ ] ) ] ] [ rate-limiter
[ ] ] [ ace statistics [ ] ]
show
Show running system information
access-list
Access list
ace
Access list entry
statistics
Traffic statistics
interface
Select an interface to configure
rate-limiter
Rate limiter
Default:
N/A
Usage Guide:
To display the ACL Statistics, Rate Limiter List, ACE Statistics.
Example:
To display the ACL Statistics, Rate Limiter List, ACE Statistics for interface GigabitEthernet 1/1.
Switch # show access-list interface GigabitEthernet 1/1 ace statistics rate-limiter
Switch access-list ace number: 0
Switch access-list rate limiter ID 1 is 1 pps
Switch access-list rate limiter ID 2 is 1 pps
Switch access-list rate limiter ID 3 is 1 pps