Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 148)

-148-
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# end
Switch#
4.2.49.3 exit
Command:
exit
exit Exit from current mode
Default:
None
Usage Guide:
To exit current mode
Example:
To exit current mode.
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# exit
Switch (config)#
4.2.49.4 ip address
Command:
ip address
ip Interface Internet Protocol config commands
address
Address configuraton
IP address
IP netmask
Default:
None