Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 275)

-275-
4.2.175.3 exit
Command:
exit
exit Exit from current mode
Default:
None
Usage Guide:
To exit current mode
Example:
To exit current mode.
Switch# configure terminal
Switch (config)# snmp-server host interlogix
Switch (config-snmps-host)#exit
Switch (config)#
4.2.175.4 host
Command:
host [ | | ] { informs |
traps }
host
host configuration
hostname of SNMP trap host
IP address of SNMP trap host
IP address of SNMP trap host
UDP port of the trap messages
informs
Send Inform messages to this host
traps
Send Trap messages to this host
Default:
None