Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 119)

-119-
Command:
qos dscp-translate
qos
Quality of Service
dscp-translate
DSCP ingress translation
Default:
Disabled
Usage Guide:
To configure DSCP ingress translation of QoS for specific interface
Example:
To configure DSCP ingress translation of QoS for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos dscp-translate
4.2.48.90 qos map cos-tag
Command:
qos map cos-tag cos dpl pcp dei
qos
Quality of Service
map
QoS Map/Table configuration
cos-tag
Map for cos to tag configuration
cos
Specify class of service
Specific class of service or range
dpl
Specify drop precedence level
Specific drop precedence level or range
pcp
Specify PCP (Priority Code Point)
Specific PCP
dei
Specify DEI (Drop Eligible Indicator)
Specific DEI
Default:
Disabled
Usage Guide:
To configure (QoS class, DP level) to (PCP, DEI) Mapping of QoS for specific interface