Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 166)

-166-
ip Internet Protocol
arp
Address Resolution Protocol
inspection
ARP inspection
translate
arp inspection translate all entries
interface
arp inspection entry interface config
GigabitEthernet 1 Gigabit Ethernet Port
10GigabitEthernet 10 Gigabit Ethernet Port
Select a VLAN id to configure
Select a MAC address to configure
Select an IP Address to configure
Default:
N/A
Usage Guide:
To translate dynamic entries into static ARP inspection table for specific interface.
Example:
To translate below dynamic entries into static ARP inspection table for GigabitEthernet 1/1.
Switch# configure terminal
Switch (config )# ip arp inspection translate interface GigabitEthernet 1/1 1
00:11:22:33:44:55 192.168.0.18
4.2.54 ip arp inspection vlan
Command:
ip arp inspection vlan logging all | deny | permit
ip Internet Protocol
arp
Address Resolution Protocol
inspection
ARP inspection
vlan
arp inspection vlan setting
arp inspection vlan list
logging
ARP inspection vlan logging mode config
all
log all entries
deny
l og denied entries
permit
lo g permitted entries