Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 162)

-162-
Switch (config-if-vlan)# ipv6 mld snooping query-max-response-time 600
4.2.49.26 ipv6 mld snooping robustness-variable
Command:
ipv6 mld snooping robustness-variable
ipv6 IPv6 configuration commands
mld
Multicast Listener Discovery
snooping
Snooping MLD
robustness-variable
Robustness Variable
Packet loss tolerance count from 1 to 255
Default:
2
Usage Guide:
To configure Robustness Variable of MLD snooping for specific VLAN
Example:
To configure Robustness Variable (88) of MLD snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ipv6 mld snooping robustness-variable 88
4.2.49.27 ipv6 mld snooping unsolicited-report-interval
Command:
ipv6 mld snooping unsolicited-report-interval
ipv6 IPv6 configuration commands
mld
Multicast Listener Discovery
snooping
Snooping MLD
robustness-variable
Robustness Variable
0 - 31744 seconds
Default: