Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 143)

-143-
Switch (config-if) # switchport vlan mac 00:55:44:33:22:11 vlan 5
4.2.48.129 switchport vlan mapping
Command:
switchport vlan mapping
switchport
Switching mode characteristics
vlan
VLAN commands
mapping
Maps an interface to a VLAN translation group.
Grou p id
Default:
None
Usage Guide:
To configure Group mapping Table for specific interface
Example:
To configure Group mapping (Group 25) for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # switchport vlan mapping 25
4.2.48.130 switchport vlan protocol group
Command:
switchport vlan protocol group vlan
switchport
Switching mode characteristics
vlan
VLAN commands
protocol
Protocol- based VLAN commands
group
Protocol- based VLAN group commands
Group Name (Range: 1 - 16 characters)
vlan
v lan keyword
VLAN ID required for the group to VLAN mapping (Range: 1-4095)
Default: