Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 285)

-285-
cost
STP Cost of this port
Cost range
auto
Use auto cost
Default:
Auto
Usage Guide:
To configure the Path Cost of MSTI Port
Example:
To configure the Path Cost (321) of MSTI Port (MST 2)
Switch# configure terminal
Switch (config)# snmp-server host interlogix
Switch (config-snmps-host)# spanning-tree mst 2 cost 321
4.2.176.10 spanning-tree mst port-priority
Command:
spanning-tree mst port-priority
spanning-tree
Spanning Tree protocol
mst
STP bridge instance
instance 0-7 (CIST=0, MST1=1...)
port-priority
STP priority of this port
Range (lower higher priority)
Default:
Auto
Usage Guide:
To configure the Port Priority of MSTI Port
Example:
To configure the Port Priority (96) of MSTI Port (MST 2)
Switch# configure terminal
Switch (config)# snmp-server host interlogix