FXpansion BFD2 Manual - Manual (Page 47)

Next slot mode
If this mode is enabled, the wizard continues to the next occupied kit-piece slot after a kit-piece is
mapped. This is repeated either until there are no more filled slots, or until the end of the kit is reached. The order of slots is dic-
tated by the slot numbers – section 2:2 contains a summary of the slots in each kit size.
To map the whole kit, click on the kick 1 slot (slot 1) and enable the Next Slot mode setting. This results in moving to the next kit-
piece after the current one has been fully mapped.
Next KP button
If you do not want to map an articulation when in Next slot mode, and there are no more articulations in the current kit-piece but
there are kit-pieces loaded into slots after the current slot in the kit, the ‘Next button’ is replaced by the ‘Next KP’ button – click it to
move onto the next kit-piece.
Wait mode
By default, Wait mode is enabled, meaning that the wizard waits indefinitely for you to play a MIDI note
during stage 1.
When Wait mode is disabled, you are given a set amount of time – 15 seconds by default – to MIDI learn each articulation before
the wizard moves onto the next one. If no MIDI note is received within this time, no assignment is made for that articulation.
The amount of time available for each articulation is defined in the BFD2 MIDI preferences, with the MIDI Learn skip time setting.