FXpansion BFD2 Manual - Manual (Page 126)

1
Key labelling
Keys containing a single articulation mapping are shown in the following format:
[Slot name] : [Artic index] [Kit-piece] [Articulation]
If more than one articulation has been mapped to a key, it is labelled as follows:
[no. of articulations]
For example, if a snare is loaded into the snare1 slot and the drag articulation is mapped to a key, the following is shown:
S:
If you delete this articulation from the key, and then load a tom into the same
slot, the following would be displayed on the key:
S:
If you now map any other articulation to the key without deleting the current
mapping, the label would change to read as follows:
<>
Other labels
• Groove notes are labelled with:
• Slot chokes are labelled as follows:
Slot [slot number] Choke
• Mappings whose articulations are not currently loaded are labelled with a (!) indicator.
Key colours
Keys are shaded to represent various states.
Green
Grey
Blue
Light blue
Purple
One or more articulation mappings
exist on the key.
A Groove note exists on the key.
A slot choke note exists on the key.
The currently selected key.
Destination slot during a mapping
operation.