beautypg.com

Flintec FAD-30 User Manual

Page 8

background image

FAD-30 Technical Manual, Rev. 1.06 December 2012

Page 8 of 48

Communication and Setup:

Serial interface RS-232C:

9600 baud (8,N,1)

Other interfaces

Depends on instrument type

Response time

< 4 ms (delay after each read or write command)

Setup and calibration

By PC software via RS232C, backup data stored on PC

Power supply:

DC power supply

10 to 28 VDC, < 200 mA, not galvanically isolated

Environment and Enclosure:

Operation temperature:

Between -10 °C and +40 °C at maximum 85% RH max, non-condensing

Enclosure and protection

Polyamide, for DIN-rail mounting, IP20

Instrument with RS485 interface: Type FAD-30

Communication:

Serial interface RS485

1200 to 57600 baud (8N1, 7E1, 7O1), bus capability up to 31 units

Communication mode

Continuous or requested

Dimensions & weight

99 x 22.5 x 114.5 mm (L x W x H), weighs approx. 110 g

Instrument with Modbus RTU interface: Type FAD-30MB

Communication:

Serial interface RS485

1200 to 57600 baud (8N1, 7E1, 7O1), bus capability up to 31 units

Communication mode

Continuous or requested or Modbus RTU

Address range

1...31

Dimensions & weight

99 x 22.5 x 114.5 mm (L x W x H), weighs approx. 110 g

Instrument with Profibus DP interface: Type FAD-30PB

Communication:

Profibus DP-V0 + DP-V1

9,6 kbit/s to 12 Mbit/s (automatic), galvanically isolated interface

Address range

1...126

Dimensions & weight

99 x 45 x 114.5 mm (L x W x H), weighs approx. 150 g

Instrument with ProfiNet interface: Type FAD-30PN

Communication:

ProfiNet

100 Mbit/s (full duplex), galvanically isolated interface

IP settings

DHCP or manual setup by PC software

Dimensions & weight

99 x 45 x 114.5 mm (L x W x H), weighs approx. 150 g

Instrument with Ethernet TCP/IP interface: Type FAD-30EN

Communication:

Ethernet TCP/IP

10 Mbit/s (half duplex), galvanically isolated interface

IP settings

Manual setup by PC software

Dimensions & weight

99 x 45 x 114.5 mm (L x W x H), weighs approx. 150 g

Other

Web client interface

Instrument with CANopen interface: Type FAD-30CO

Communication:

CANopen V.2.0

10 kbit/s...1 Mbit/s (automatic), galvanically isolated interface

Address range

1...126

Dimensions & weight

99 x 45 x 114.5 mm (L x W x H), weighs approx. 150 g