Modbus rtu setup (for fad-30mb only) – Flintec FAD-30 User Manual

Page 33

Text mode
Original mode

FAD-30 Technical Manual, Rev. 1.06 December 2012

Page 33 of 48

6.5. Modbus RTU Setup (for FAD-30MB only)

If the FAD-30MB instrument is setup for Modbus, it can be used as a Modbus RTU slave in a RS-485
communication network. Function codes „0x03‟ and „0x10‟ are supported. For RS-485 setup please refer to
chapter 5.3.2, for the Modbus data structure please refer to chapter 5.10.