Flintec FAD-30 - Manual (Page 6)

FAD-30 Technical Manual, Rev. 1.06 December 2012 Page 6 of 48
3. I
NTRODUCTION
3.1. Overview
The type FAD-30 A/D Converter Series consists of powerful and economic state-of-the-art instruments for static
and dynamic weighing applications plus force and torque measurements.
Each instrument of the series converts the analogue low level signal from a load cell or a strain gauge sensor to
a digital high-resolution and high-accuracy signal and transmits the digital data to an external PLC or PC
system. As a special feature the instruments can switch between unipolar and bipolar input range without
affecting the external resolution.
The type FAD-30 A/D Converter Series comprises various instuments for different industrial bus systems:
FAD-30 A/D Converter
with RS485 interface
FAD-30PB A/D Converter with
Profibus DP interface
FAD-30EN A/D Converter with
Ethernet TCP/IP interface
FAD-30MB A/D Converter with
Modbus RTU interface FAD-30PN A/D Converter with
ProfiNet interface FAD-30CO A/D Converter with
CANopen interface
Figure 3.1
– FAD-30 A/D Converter series instruments