EVCO EPK4LHX Hardware manual User Manual
Page 3
EVCO S.p.A.
c-pro 3 NODE kilo | Hardware manual ver. 1.0 | Code 114CP3NKE104
page 3 of 44
Index
1
INTRODUCTION .............................................. 5
1.1
Introduction ................................................... 5
1.2
Summary table of available models, their main
characteristics and purchase codes .................... 6
2
DESCRIPTION ................................................. 8
2.1
Description ..................................................... 8
3
DIMENSIONS AND INSTALLATION ..................... 9
3.1
Dimensions: ................................................... 9
3.2
Installation ..................................................... 9
3.3
Installation warnings ..................................... 10
4
ELECTRIC CONNECTION ................................. 11
4.1
Connectors ................................................... 11
4.2
Meaning of connectors ................................... 11
4.3
Insertion of the termination resistor of the CAN
CANBUS port ................................................ 15
4.4
Insertion of the RS-485 MODBUS master/slave
port termination resistor ................................ 15
4.5
Insertion of the RS-485 MODBUS slave port
termination resistor ....................................... 15
4.6
RS-485 MODBUS master/slave port polarisation 15
4.7
RS-485 MODBUS slave port polarisation ........... 15
4.8
Example of electric connection ........................ 16
4.9
Warnings for the electric connection ................ 16
5
USER INTERFACE .......................................... 17
5.1
Keypad ........................................................ 17
5.2
LED warning lights ........................................ 17
6
CONFIGURATION .......................................... 19
6.1
Configuration of abuilt-in LCD programmable
controller ..................................................... 19
6.2
Configuration of a blind programmable controller
................................................................... 20
6.3
I/O expansion configuration ............................ 21
6.4
Configuration of a programmable controller
through a remote user interface ...................... 21
6.5
List of configuration parameters ...................... 23
7
ACCESSORIES .............................................. 34
7.1
0810500018/0810500020 connection cables .... 34
7.2
4GB EVUSB4096M USB flash drive .................. 34
7.3
Non opto-isolated RS-485/USB serial interface
EVIF20SUXI .................................................. 34
7.4
Cut phase speed regulator for EVDFAN1 single-
phase fans ................................................... 35
7.5
CJAV31 connection kit ................................... 35
8
TECHNICAL DATA .......................................... 36
8.1
Technical data .............................................. 36