EVCO EPK4LHX Hardware manual - Manual (Page 18)

EVCO S.p.A. c-pro 3 NODE kilo | Hardware manual ver. 1.0 | Code 114CP3NKE104
page 18 of 44
CAN
CAN CANBUS communication LED
if it is on, the device is configured to communicate via CAN CANBUS with another device, but the communication has not
been established
if it is flashing slowly, the CAN CANBUS communication has been established, but is not entirely correct
if it is flashing quickly, the CAN CANBUS communication shall established and be entirely correct
if it is off, no CAN CANBUS communication is in progress
L1
Auxiliary LED
The operation of this LED can be set via the UNI-PRO 3 development environment
For additional information, please refer to the following chapters.