EVCO EPK4BHQ1AH Hardware manual - Manual (Page 27)

EVCO S.p.A. c-pro 3 NODE kilo+ | Hardware manual ver. 1.0 | Code 114CP3NKPE104
page 27 of 55
CAN
CAN CANBUS communication LED
if it is on, the device is configured to communicate via CAN CANBUS with another device, but the communication has not
been established
if it is flashing slowly, the CAN CANBUS communication has been established, but is not entirely correct
if it is flashing quickly, the CAN CANBUS communication shall established and be entirely correct
if it is off, no CAN CANBUS communication is in progress
L1
Auxiliary LED
The operation of this LED can be set via the UNI-PRO 3 development environment
For additional information, please refer to the following chapters.