EVCO EPK4BHQ1AH Hardware manual User Manual

Page 24

EVCO S.p.A.

c-pro 3 NODE kilo+ | Hardware manual ver. 1.0 | Code 114CP3NKPE104

page 24 of 55

4.9

Warnings for the electric connection

do not use electric or pneumatic screwdrivers on the device terminal board

if the device has been taken from a cold to hot place, humidity could condense inside; wait about 1 hour before powering it

make sure that the power supply voltage, the frequency and the operational electric power of the device, correspond with

those

the

local

power

supply;

see

chapter

“