6 tare function procedures, Tare function procedures -11 – Toshiba TEC EM1-31059 User Manual
Page 88
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
9. OPERATING PROCEDURES
9.6
TARE FUNCTION PROCEDURES
EMI-31059
9.6 TARE FUNCTION PROCEDURES
Control lock; REG, M.DOWN, or REWRAP
Mode SW (2): WEIGH or FIX
1) Tare are two kinds of tare subtraction procedures, one is “Direct tare", the other is “Preset tare”.
Direct tare subtraction
Preset tare subtraction
NOTES:
1. Tare weight subtraction is available up to 30 lbs. When tare weight subtraction is in
operation, however, the scalable range for net weight becomes less by the amount of
the tare.
(Net weight
= Gross
weight - Tare weight)
2. The entry weight for a preset tear must be integer times of 1.
9-11
This manual is related to the following products: