Menu no. 6 – Toshiba TEC EM1-31059 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
7. PROGRAMMING PROCEDURES
EMI-31059
Menu No. 6
Menu No. 6
• Initial Setting
The function of this scale depends on initial setting as follows.
Numbers 0 to 26 are available for the initial setting (however, initial set numbers 11 to 19 are not
used at present). The initial setting is available only when the DIP Switch #2-5 installed in the SL-
6600 is set to the OFF position. To set the initial settings for numbers 20 to 26 DIP Switch #3-2
must be set to the ON position.
Select programming
menu
PROG.
Select the initial set #.
(#11-19 are not used.)
Select the item #.
(1~8)
Select the status #.
(Refer to function
table.)
ENTER
T
NEXT
or PLU
(left)
i
(right)
±
EMTER
PROG.
INITIAL
ex.
ex.
ex.
(Finish)
(Select another
programming menu.)
INITIAL SET
P
6
ENTER THE NUMBER
P6
ENTER THE NUMBER
0
2
6
ex.
P6 0
P6 0
1-0
Item #
_____T“
Status # - ■''
INITIAL
P6 0
4-0
INITIAL
P6 0
4-1
ENTER THE NUMBER
P6
INITIAL SET
P
6
.IMPORTANT.
Be sure to set to “0” for the blank status of the function in the function table.
7-21