Toshiba TEC EM1-31059 - Manual (Page 12)

3. NAME AND FUNCTION OF EACH PART
EMI-31059
3.4 KEY LAYOUT
• Programming Key Functions
Key Function
CLEAR
This key allow the clearing of numeric entries prior to the depression of
another function key.
It is also used to release the scale from the error mode.
SHIFT
(on scale)
This key is used to select the upper or lower character indicated on the
keytop when setting a commodity name, ingredient message, etc.
SET
NEXT
This key use to recall the next PLU# ( +1) of the PLU# currently recalled.
It is also used for label format # setting when labels are issued in
succession. When this key is pressed, three labels are issued
automatically.
NEXT
PLU
This key is used to recall the PLU# which is registered next to the currently
recalled PLU#.
It is also used to skip the digit when setting the bar code format.
AUTO
CODE
This key is used to set the auto code for UPC#.
CHANGE
PLU
This key is used to change the PLU# currently recalled.
It is also used to set label format #.
DELETE
PLU
When a PLU is no longer to be maintained in the PLU file, this key is used
to remove it. When an ingredient is no longer to be maintained in the
ingredient file, this key is used to remove it.
TEST
This key is used to print out the data set in the currently recalled PLU.
It is also used to check for the laber print position.
ENTER
During programming, this key is used to enter data.
This key is used to set the free zone of the auto code for UPC#, back the
digit when setting the bar code format, and return the setting line to the first
line while setting the second line and during the setting of the commodity
name, store address or ingredient message, etc.
This key is used to back the character when setting the commodity name,
ingredient message, etc.
DELETE
1/2 (A)
This key is used to skip the character when setting the commodity name,
ingredient message, etc.
When setting the unit price for the weighed PLU, this key is used to select
the unit of weight. (100 g or kg)
This key is used to delete a character when setting the commodity name,
ingredient message, etc.
3-4