Toshiba TEC EM1-31059 - Manual (Page 110)

EM 1-31059
US/CA type : Page 7-18
• CMT Operations
The SL-6600 is designed to interface with a Cassette Magnetic Tape loader. This loader allows the
transfer of the entire PLU file from the SL-6600 to a tape. This can be accomplished in a number of
operation steps.
In turn, Information from the tape can also be transferred to another SL-6600 or TEC SL-5900 Scale.
Select programming
menu #5.
PROG
Load the tape into
the CMT Loader.
Old formal PLU/INQ Data Verify
(SL-6600 = CMT = SL66/6600/5900)
Old format PLU/ING Data Load
(SL-6600 CMT SL66/6600/5900)
New format PLU Data Save
(SL-6600 -* CMT -► SL66/6600/5900)
New format PLU Data Verify
(SL-6600 = CMT = SL65/6600/5900)
New format PLU Data Load
(SL-6600 •<- CMT •*- SL66/6600/5900)
—► 2 -
—> 3 -
—♦ 4 -
5
—> 6 -
ENTER
ENTER
ENTER
ENTER
ENTER
PROG
(Select another
programming menu.)
CMT
p 5
ENTER THE NUMBER
P5
VERIFY PLU&ING.
P5 2
READ PLU&ING.
P5 3
WRITE PLU TO CMT
P5 4
VERFY PLU=CMT
P5 5
READ PLU FM CMT
P5 6
CMT
p 5
NOTES: 1. The error mode can be release by depressing the CLEAR \key, and operated again
through the above steps.
2. Use the metal cassette tape which is commercially available and has a capacity of 45 or
60 minutes recording.
3. For operations of the CMT Loader, refer to the instruction manual provided with the CMT
Loader.
15-4