Toshiba TEC EM1-31059 - Manual (Page 13)

3. NAME AND FUNCTION OF EACH PART
EM1-31059
3.4 KEY LAYOUT
Key Function
INSERT
This key is used to insert a space at the digits when setting the commodity
name, ingredient message, etc.
PELETE
(B)
This key is used to clear all characters on the current setting line when
setting the commodity name, ingredient message, etc.
RETURN
1/4
This key is used to move the setting line when setting commodity name,
store address, or ingredient message, etc.
t
ISPACE
This key is used to insert blank spaces in descriptors.
PROG.
This key is used to access each programming menu.
O
This key is used to select selectable items.
SEND
This key is used to store ingredient message setting data temporarily in the
work buffer during setting an ingredient message with programming menu
#11.
RECEIVE
This key is used to recall the data, which has been stored in the work buffer
by the [
send I key.
(on PC Key)
While this key is pressed down, press a character key to set the small letter
of alphabet, or upper-case character indicated on the upper area of the
keytop. When this key is released, the shifted status is cancelled.
Character Keys Character keys are used to set the upper or lower-case character indicated
on the keytop.
NOTE: When setting alphabet data such as commodity name, ingredient message, etc., through the
PC Keyboard, either small or capital letters can be selected by pushing CAPS/LOCK key.
Pushing the | ^ | key will reverse the characters.
When the power is turned off or control lock is switched, the PC keyboard will be initialized to
select capital letters.
3- 5