Toshiba TEC EM1-31059 - Manual (Page 28)

7. PROGRAMMING PROCEDURES
EMI-31059
Menu No. 3
Menu No. 3
• Setting Label Format Number and Adjusting Print Position
When the initial set #4-6 is set to “1”, the label format can be set for each of up to 14 cassette #.
When the label format is set for a cassette #, the print position for the format is also set
automatically.
[Outline]
a — PROG.
Select the cassette # which
allocates the label format #
T
by^
or - NEXT PLU key
key.
Set the cassette # Set the label to the selected
which is selected by cassette and attach it to the
cassette switch. scale. Then press the FEED
(Refer to table 3.) key to issue several labels.
NEXT
PLU
key:
key:
|-►C#0
' -----C#14
I—C#0 '
l-►C#14
C#1 —► C#2 —► C#4------------------------ ► C#7
C#13 i —C#12 4-
C#1 i —C#2 i —C#4
C#13—►C#12---------------
C#8^
-C#7 4-1
>08—
I
Enter the label format #. CHANGE 1 r
TEST
(Refer to table 2.) PLU
Switch over the
adjusting position.
1 gradation -
0.154mm (1 dot)
1 gradation ■
0.462mm (3 dots)
1 gradation ■
0.462mm (3 dots)
Only when using
the bar code
change label with
pref^ area
Be sure to
perform this
adjustment when
the label format
# of the batch
printing label is
selected.
o
Enter the comect label feed
value. (Range: 0 ~ 199)
Enter the correct value for
commodity name position.
(Range: 0~9)
Enter the correct value for
address position.
(Range: 0~15)
Enter the correct value for
pre feed area
(Range: 0~65)
O
o
o
(for format# 14-22)
o o o o
Three labels are
issued automatically.
Set the next label
format #.
CHA NGE
PI -U
(for format # 23 - 26)
PROG.
(Select another
programming menu)
7-10