Installing precaution, Introduction – Toshiba TEC EM1-31059 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1. INTRODUCTION
EMI-31059
Installing Precaution
Installing Precaution
Place the TEC Electronic Computing Scale on a flat, stable surface.
1. DON’T SUBJECT the weighing
platter to SUDDEN SHOCKS.
2. DONT PRESS THE KEYS TOO
HARD.
Keys will operate correctly if they
are merely touched lightly.
Clean the cover and platter by
wiping with a dry cloth or a cloth
soaked with detergent and wrung
out thoroughly.
4.
NEVER
USE
THINNER
OR
OTHER
VOLATILE
SOLVENT
for
cleaning.
5. DON’T POUR WATER directly on
scale.
To ensure the scale is CHierating
correctly, place a known weight on
the platter and check for correct
computing.
7. When in use, avoid locations subject to vibration and direct sunlight
After the end of daily work, turn the
power OFF, then clean and inspect
the exterior of the scale to allow
you to use the scale at its best
condition.
If the scale uses the same power source as a high voltage electric appliance,
the voltage to the scale will vary each time the appliane is activated.
Use the special power source to avoid an error operation.
10. Use a grounded electrical outlet.
(Do not use a adaption plug.)
1- 2