Menu no. 8 – Toshiba TEC EM1-31059 User Manual
Page 48
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
7. PROGRAMMING PROCEDURES
EMI-31059
Menu No. 8
Menu No. 8
• Setting Speed Key
The SL-6600 has 60 PLU speed keys which are very convenient to call a PLU quickly.
Example:
Set PLU # 100 to speed key Dl-
Select programming
menu #8.
Enter the speed key
#.
Set PLU# 100.
(Max. 6 digits)
8
PROG.
ENTER
ENTER
PROG.
(Finish)
(Select another
programming menu.)
SPEED KEY #
P8
SPEED KEY SET
P
8
SPEED KEY #
P8
SPEED KEY #
P8
12
SPEED KEY #
P8
12
SPEED KEY #
P8
12
100
SPEED KEY SET
P
8
NOTE: When “0” is set on the speed key, if this speed key is pressed in the REG, M.DOWN, or
REWRAP mode, the scale enters an error status (PLU NOT FOUND). Press the|
c
| key
to release the error mode.
7-30