Table 2: label format number table, Casseffe #3 – Toshiba TEC EM1-31059 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
7. PROGRAMMING PROCEDURES
EMI-31059
Menu No. 3
Table 2: Label Format Number Table
Select the label format number for the label to be used by referring to the table below.
NOTES:
1
.
2
.
3.
4.
5.
6
.
Casseffe #3
is designed for report paper and the labei format if setting is not required.
The pre-feed area adjustment is available only for the bar code change label.
When the label format 10 or ^ 23 is selected, the pre-feed area adjustment value
should be within the range from 0 through 29 or from 56 through
65.
(If the value is
set within the range from 30 through 55, the label cannot be issued with the label
format if 10 onf 23.)
When the label format 11 or ff 24 is selected, the pre-feed area adjustment value
should be within the range from 31 through
65.
(If the value is set within the range
from 0 through 30, the label cannot be issued with the label format if 11 or #24.)
When the initial set ff 4-6 is set to “0”, the label format is determined by the initial set
#2-7, 2-8, 4-7, and 5-3. (Refer to the function table of initial set.)
Do not select the label format number other than those listed in Table 2.
7-15