Toshiba TEC EM1-31059 - Manual (Page 10)

3. NAME AND FUNCTION OF EACH PART
EM 1-31059
3.3 CONTROL LOCK
3.3 CONTROL LOCK
The control lock has seven marked positions.
There are two control keys which will operate these locks.
Each of the following positions on the control lock serves a
different function.
Position Function
PROG.
CMT. With the manager key in this position, it is available
to program data in the PLU file. Store Address,
Printing Position, Date, Time, Initial Set, and Bar
Code Format, etc., may also be programmed.
REG. This position is the normal control lock position
which allows the issuance of printed label.
M. DOWN In the Markdown position, it is available to
designate an item for discount pricing.
REWRAP In the Rewrap position, it is available to designate
an item for rewrapping products.
X (Read) This position is used to read all the accumulated
sales totals stored in the total memory.
Z (Reset) This position is used to reset all item file totals.
BLANK No function.
Mode Switch
Mode Switch (1)
AUTO
the PRT/*
MANUAL
“AUTO” position:
When the weight becomes stable, the label will automatically be issued.
“MANUAL" position:
eight becomes stable, the label will be issued by depressinc
key.
Mode Switch (2)
WEIGH
FIX
BY COUNT
“WEIGH” position:
This position is used in_ the weighing function of the SL-6600.
“FIX” position:
The Unit Price is entered directly as the Total Price on calling up the
PLU
item and that the Total Price cannot be changed by any
subsequent weighing (Fix Price function).
“BY COUNT” position:
It is available to produce labels which contain information on quantity
pricing, instead of weight.
3-2