Toshiba TEC EM1-31059 - Manual (Page 15)

3. NAME AND FUNCTION OF EACH PART
EMI-31059
3.4 KEY LAYOUT
Name of Key Function
1/2 Key, 1/4 Key
1/2 1/4
These Keys are used to calculate the unit price per 1/2 lb or 1/4 lb.
SAVE Key
SAVE
This key is used after placement of the tare or entry of unit price.
DATE & TIME Key
DT^
TM
This key is used to indicate the date on the remote display and for
temporary date changes.
GRADE LINE Key
GRADE
LINE
This key is used to call the grade line message.
FOR Key
FOR
This key is used to generate the zone total report when control lock is
set to the “X” or “Z” position.
VOID Key
VOID
This key is used to cancel only one commodity’s data by depressing
this key after its registration.
It is also used to return the operation step to the previous step.
NEXT PLU Key
NEXT
PLU
This key is used to call out the next PLU#, and forward the operation
step to the next step.
O
In “X” or “Z” control lock position, this key is used to generate the
block total report.
In “REG.” control lock position, this key is used to select whether the
data should be printed on the label or not.
PROGRAM Key
PROG.
This key Is used to change the unit price and to select a print item for
label print. This key is also used when issuing a combination report
of X (READ) and Z (RESET).
PRESET COUNT Key
PRESET
COUNT
This key is used to preset the number of issuing labels.
LOGO Key
LOGO
This key is used to call the logo data.
SPEED Keys
1 60
These keys are used to call the PLU data of frequently used
commodities.
3- 7