Kenwood TH-26A User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4-11. DTMF MEMORY FUNCTION [ With DTMF
KEY PAD DTP-1 (Option) and DTMF
UNIT DTU-1 (Option)]
Four
different
DTMF
telephone
numbers,
of
up
to
a
maximum of 15 digits, can be memorized. The function
can be activated by pressing the * key while turning the
POWER
switch
ON.
Channels
from
1
through
15
will
then be used for storing frequency data and channels
16 ~ 20 will be used to store telephone number data.
The function can be turned off by pressing the # key
while turning the POWER switch ON.
Note
The contents of channels 16 ~
20 will be erased.
• Storing the DTMF codes
1. Press the * key while turning
O
ON the POWER switch.
0
2.
Press the * key within 10
seconds
of
pressing
the
F
key.
The
display
will
show
the following (see right).
3. Enter the DTMF code on the ten key (up to a
maximum of 15 digits).
Notes
1. If you enter the wrong number, start again.
2. If you want to stop the entry midway, press the #
key.
The
previously
displayed
frequency
will
reappear on the display.
4.
When
the
DTMF
code has
been
entered,
select
the
channel (A, B, C, D) where
you want to store the DTMF
code and press the key for
that
channel.
When
the
DTMF code is stored to that
channel,
the
previously
shown
frequency
will
reappear on the display. (Ex.
Channel A)
• Making a DTMF call
To transmit:
Press the key for the channel
(A, B, C or D) where you stored
the
DTMF
code
in
receive
mode.
The
display
will
show
the
following
(see
right).
(Ex.
Channel A)
Then
press
the
PTT
switch
within 10 seconds to switch to
the
transmit
mode.
The
DTMF
code
will
be
output
and
the
previously
shown
frequency
will reappear on the display.
38