Kenwood TH-26A - Manual (Page 2)

Thank you for purchasing this new transceiver.
IMPORTANT
Please read this instruction manual carefully before
placing your transceiver in service.
SAVE THIS INSTRUCTION MANUAL.
The following explicit definitions apply in this manual:
NOTE : If disregarded, inconvenience only, no
risk of equipment damage or personal
injury.
CAUTION : Equipment damage may occur, but not
personal injury.
This Instruction Manual covers the following models:
TH-26A : 144MHz FM (VHF FM) transceiver without
DTMF Pad.
TH-26AT : 144MHz FM transceiver with DTMF Pad.
TH-26E : 144MHz FM transceiver.
TH-46A : 430MHz FM (UHF FM) transceiver without
DTMF Pad.
TH-46AT : 440MHz FM transceiver with DTMF Pad.
TH-46E : 430MHz FM transceiver.
Attempting service or alignment without factory
authorization can void the transceiver’s warranty.
CAUTION
Long
transmissions or extended operation in the HI
power mode might cause the rear of this transceiver
to get warm. Do not place the transceiver where the
heat sink (rear panel) might come in contact with
plastic or vinyl surfaces. Use of an external antenna
for fixed station is recommended.
FCC WARNING
This equipment may generate or use radio frequency
energy.
Changes or modifications to this equipment
may cause harmful interference unless the
modifications are expressly approved in the
instruction manual. The user could lose the authority
to operate this equipment if an unauthorized change
or modification is made.
Under normal circumstances, the transceiver will
operate in accordance with these operating
instructions. The transceiver has been adjusted at the
factory and should only be readjusted by a qualified
technician with proper test equipment.