Vo. lo – Kenwood TH-26A User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Press the F key for longer than 1 second. The F indicator
will begin to flash. Press the CALL key within 10 seconds
of pressing the F key to scan the VFO frequency shown
on the display, the memory channel that was last used
and the call channel in turn.
4-5-10. Memory Channel Lockout
This
function
allows
you
to
specify
which
memory
channels you wish to skip during memory channel scan.
1.
Press the MR key to select the memory channel
mode.
2.
Select the memory channel that you wish to skip by
turning the Tuning control.
3.
Press the F key for longer
than
1
second.
The
F
indicator will begin to flash.
Within
10
seconds
of
pressing the F key press the
MR key. A ★ indicator will
appear
to
the
left
of
the
memory channel number.
memory
skipped
4-5-9. V/M/C(VFO/Memory/Call) Scan
B
For longer than 1 second
A
luC
r
•Vo. lo“
b
This indicates the
channel will be
during the memory channel
scan mode.
4. Repeat steps 2 and 3 to lock out any other channels
you wish to skip.
5.
To cancel the lockout, select the desired memory
channel as described in steps 1, 2 and 3 above. A ★
indicator should appear to the left of the memory
channel number. To cancel the lock out press the F
key for longer than 1 second and then press the MR
key. The ★ indicator should turn off.
31