Kenwood TH-26A User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(DLAMP switch
1750/LAMP switch (European and U.K. version)
(Except European and U.K. version)
This switch is used to control the night lamp on the LCD
display.
The
lamp
will turn itself OFF automatically 5
seconds after the last key operation.
Pressing the key within 10 seconds of pressing the F key
will light the lamp on the LCD display.
If you press
and hold
this key while you turn on the
POWER
switch
you
will
clear
all
the
microprocessor’s,
operator programmed, memory section.
(European and U.K. version)
This switch is used to transmit the access tone, you need
not press the PTT switch.
Pressing the key within 10 seconds of pressing the F key
will control the night lamp on the LCD display. The lamp
will turn itself OFF automatically 5 seconds after the last
key operation.
Pressing the
F key for longer than 1
second and
then
pressing the
this key
will light the lamp
on the
LCD
display.
If you press
and hold
this key while you turn on the
POWER
switch
you
will
clear
all
the
microprocessor’s,
operator programmed, memory section.
®EL L H switch
This switch is used to select the transmit output power.
(DRELEASE button
Press this button up to release the battery pack.
(DF.LOCK switch
This key will deactivate all functions except the Lamp,
I, PTT functions.
16