Kenwood TH-26A User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
0)VFO indicator
This indicator lights during VFO operation.
(§) ■■■■■■■■■■■■
Used to indicate the relative receive signal strength, or
as
an
indication
of
the
battery
voltage
level
during
transmit.
®MHz dot
This indicator flashes during scan operations.
®MHz indicator
This indicator flashes during MHz tuning steps.
©BUSY indicator
ON whenever there is a signal
open the squelch, or when the
and the CTCSS key is OFF.
(g)APO indicator
This indicator is ON when the Auto Power Off function
is active.
@8 indicator
This indicator is ON when the Battery Saver function is
active.
©Frequency display
Displays the operating frequency to the nearest kHz.
present strong enough to
squelch is not activated.
0MONI switch
When operating in the CTCSS (Tone Squelch) mode you
can use this key to determine if the frequency is in use
before
transmitting.
Pressing
this
key
will
disable
the
CTCSS function as long as the key is held depressed.
If you press and hold this key while you turn on the
POWER
switch
you will
change to channel display or
frequency display.
(DPTT (Push To Talk) switch
Press this switch whenever you wish to transmit.
15