8. tone alert system, 9. bahery saver – Kenwood TH-26A User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4-8. TONE ALERT SYSTEM
The
Tone
Alert
function
will
provide
an
audible
“Alarm” to signal when someone is transmitting on the
frequency you
are
monitoring. When used in
conjunction
with
the
CTCSS
function
this
would
allow
the transceiver to act similar to a private pager system!
1. Adjust the SQL control to the threshold point.
2. If you will be using the CTCSS function you should
select
the
proper
tone
frequency
and
ensure
the
CTCSS indicator is on in the display.
3. Press the T.ALT key. The T.ALT indicator will light.
4.
When a signal is received
that
will
open
squelch
the
following actions take place:
The
T.ALT
indicator
will
begin to flash.
The BUSY indicator will turn
Note
The Tuning control, PTT switch and all the keys except
MONI, LAMP, and F are not effective during the T.ALT
operations.
During
the
T.ALT
operations
the
Automatic
Power
OFF function are disabled.
4-9. BAHERY SAVER
The
transceiver
provides
a
battery
saver
mode
to
conserve on battery power.
The transceiver will activate the battery saver circuit 10
seconds after the last key operation with the squelch
closed.
The function will be released by key operation or when
squelch opens.
The function cannot operate during scan or tone
light