Figure 31 – Kenmore 808353 User Manual

Page 35

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Testing the Motor and Relay

Stan the dishwasher at the beginning of a cycle, and allow the unit to electrically advance through the first

fill The motor should start in a counter*ciock-wise direction iccw).

D Motor Main or Run Winding Check

CAUTION:

Disconnect the power to the irtachine while connecting the voltmeter in the circuit.

1 Connect a voltmeter in the motor run winding circuit as outlined in Figure 3I, position "A " If your motor

has a connector block, meter must have a probe that can be inserted into the block

FIGURE 31

3 2