Brother FAX-400 User Manual
Page 83
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I1I-7. CONNECTING TO A TELEPHONE LINE
- If you have call waiting, ringmaster, or any other custom calling
feature on your telephone line it may create a problem in the
operation of your fax unit
-
As
with all fax units this machine must be connected to a two
wire system. If your line has more than two wires proper
connection of the fax machine can not he made.
Connecting to a
private branch
exchange
The following points should be kept in mind if you are installing the
machine to work with a private branch exchange (PBX).
1) It is not guaranteed that the unit will operate correctly under all
circumstances with approved PBXs. Any cases of difficulty
should be reported first to your Brother dealer.
2) If all incoming calls will be answered by a switchboard operator,
it is recommended that the AUTO ANSWER function be set to
be manual, (see page IV-1-7) All in-coming calls should initially
be regarded as telephone calls.
3) The unit may be used with either the pulse or tone dialing
telephone types.
1II-7-2