Brother FAX-400 - Manual (Page 78)

IV-1. CONFIGURING THE MACHINE
- You can only overwrite characters. Insertions cannot he made.
- You can overwrite with a space by pressing the * key once.
- If you want to change a character, use the cursor keys to
move the cursor underneath the character and enter a new
character.
- Press the CLEAR key to delete the character indicated by the
cursor position, and all characters to the right of the cursor.
Selecting tone
or pulse dialing
©
There are two different dial types, and you must select the type of
signal suitable for your telephone line.
- The default setting is 'Hone".
1) Press the FUNCTION key. Then press the 5 key on the number
keys.
5 . U S E R O P T I O N S
PRESS SET KEY
¡NTEfíRUPT
I
0
0
2) Press the SET key. Then press the 0 key followed by the 2 key.
0 2 . T O N E - P U L S E
P R E S S S E T K E Y
3) Press the SET key.
1
C U R R E N T : T O N E
1 . T O N E 2 . P U L S E
O -
" 0
mEfífí¿jPT
4) Press the 1 key for tone dialing, the 2 key for pulse dialing.
T O N E - P U L S E : P U L S E
P R E S S S E T K E Y
5) Press the SET key to confirm your selection.
IV-1-6