Brother FAX-400 - Manual (Page 69)

IV-1. CONFIGURING THE MACHINE
- The cost of the transmission (borne by the sending party) will be
calculated from the point in time at which the beep signals that
the line connection has been made, until the line is disconnected.
- After beep signal, there is no sound for about 4 seconds to detect
a CNG which is sent by other party.
Setting the F/T ringing Vou can select the F/T Ringing period by following the procedure
period below.
- The initial setting is 30 seconds.
2
© 1) Press the FUNCTION key. Then press the 5 key.
5 . U S E R O P T I O N S
P R E S S S E T K E Y
iUTEFIRUPT O Z
0
0
2) Press the SET key. Then press the 0 key followed by the 5 key.
0 5 . F / T - R I N G T I M E
P R E S S 5 Ы K E Y
3) Press the SET key.
C U R R E N T : 3 0 S E C S .
1 . 1 0 2 . 2 0 3 . 3 0
or
0 . " ©
©
4) Press the 1 key to select 10 seconds, the 2 key for 20 seconds, the
3 key for 30 seconds.
F / T - R I N G T I M E : 2 0 S E C S .
P R E S S S E T K E Y
5) Press the SET key to confirm your selection.
IV-1-9