Brother FAX-400 - Manual (Page 62)

IV-2. SENDING A FAX
2. SENDING A FAX
There are two methods of sending a fax transmission - automatic
and manual.
Automatic
transmission
START
To transmita document automatically, set the document face down
in the document feeder. The following screen appears:
F A X E N T E R F A X N O .
C O P Y P R E S S C O P Y K E Y
Dial the fax number of the destination using one-touch, speed dial,
or manual dialing. Then, press the START key.
The document is read through the machine automatically.
On successful completion of transmission, the machine will beep.
If transmission veriification is "ON", then you will get a report at the
end of each successful transmission.
If the telephone connection was not successful, and auto redial was
set to "on", the machine will try to send again automatically. (See
page IV-1-10.) If auto redial was set to "off", the transmission will
fail.
If the transmission was not successful then, the unit will print out
a Transmission Verification Report (error) automatically.
If the distant end is busy or there is no response the LCD will read
either "NO RESPONSE OR BUSY", and the unit will print out a
Transmission Verification Report (busy) automatically.
TRANSMISSION VERIFICATION REPORT
TIME ; : 06/01/1991 14:18
NAME : : BROTHER
FAX ;: 052-811-5981
TEL ;: 052-824-2554
DATE.TIME 06/01 14:16
FAX NO./NAME HEAD QTR.
DURATION 00:01:33
PAGE (S) 01 COVERPAGE CALL BACK MSG
RESULT ERROR
MODE FINE
IV-2-1