Brother FAX-400 - Manual (Page 3)

TELEPHONE
TELEPHONE
SYMPTOM POSSIBLE CAUSE ACTION cf.
One touch and speed
dialing don't work • Power cord is disconnected
• Numbers have been
registered incorrectly
• Your telephone has been set
to the wrong PULSE/TONE
setting
• Numbers have been
registered as chain dial.
• Plug the cord into the power
outlet
• Check and (if necessary)
correct the registration
• Check and (if necessary)
correct the PULSE/TONE
setting
• Check and (if necessary)
correct the registration
riI-6-l
No sound is
produced when you
press HOOK • The power cord is
disconnected
• The monitor switch is set low.
• The telephone line is not
connected
• Plug the cord into the power
outlet
• Turn the monitor switch high.
• Connect the fax unit to the
telephone line
III-6-1
II- 3-3
III- 7-1
COPYING
SYMPTOM POSSIBLE CAUSE ACTION cL
Nothing comes out
of the slot
• The paper roll is not inserted
properly
• Recording paper jam
• Cover not closed properly
• Reload the paper correctly
• Open the recording cover and
remove the jammed paper.
Make sure the paper is loaded
correctly
• Push the cover closed until
you hear a click
riI-5-1
VI-5
No image appears on
the paper
• The paper roll is loaded
upside down
• The document is upside
down in the feeder
• Reload the paper correctly and
make another copy
• Load the document in the
feeder face down and make
another copy
III-5-1
Print quahty of the
copy is poor • The wrong recording paper is
being used
• Use Brother thermal recording
paper
VI-3