Brother FAX-400 - Manual (Page 65)

IV-2. SENDING A FAX
These current settings should be made after setting the document
face down in the document feeder (if needed)^ but before entering
the fax number.
Set the Doc. In the
feeder
Enter Fax No. Press START key
STAfir
■>
• Resolution: This can be changed from standard to fine (for
newsprint and drawings), super fine (for highly detailed
drawings), photo (for sending pictures), by pressing the resolution
key. (See page V-1-1)
• Contrast: This can be changed automatically.
If you want to send a super-light document, you can select "super
lighT"' mode manually. (See page V-2-1)
• super mVFRPAGE: This exclusive Brother feature lets you
send an extra sheet which includes your name and fax number as
well as those of the destination. In addition, a message such as an
"urgent!", "confidential", or your own message can be included
with this information. (See page V-4-1)
• Timer: This option allows you to set a time at which you want
your documents to be sent. This means it is possible to send a
document when you are not in the office (e.g. at night when
telephone rates are low). (See page V-6-1)
• Polling: Fax units can use this function to request documents
from other units. Several sub-options are also available to let you
make the most effective use of this feature. (See page V-8-1)
• Password: This security function lets you send and receive faxes
in a closed network, and prevents reception of junk faxes. (See
page V -7-1)
• Call Reservation: This allows telephone conversation with the
other party after sending message. (See page V-5-1)
Redialing If the number that you have dialed is engaged you can redial it
without having to re-enter the number. There are two different
ways of doing this, depending on whether you are using manual or
automatic transmission.
IV-2-4