Brother FAX-400 - Manual (Page 70)

iV-1, CONFIGURING THE MACHINE
Setting the ring
delay
r" I
©
You can select the number of times the telephone will ring before
the machine will switches to reception mode.:
- The initial setting is Longer.
1) Press the FUNCTION key. Them press the 5 key on the number
keys.
5 . U S E R O P T I O N S
P R E S S S E T K E Y
INTERRUPT 02
0
0
2) Press the SET key. Then, press the 0 key followed by the 1 key.
0 1 . R I N G D E L A Y
P R E S S S E T K E Y
O ' “ ©
INTERRUPT
r............ I
3) Press the SET key.
J
C U R R E N T : L O N G E R
1 . S H O R T E R 2 . L O N G E R
4) Press the 1 key for a shorter ring delay (1 ring), the 2 key for a
longer ring delay (4 rings).
R I N G D E L A Y : S H O R T E R
P R E S S S E T K E Y
5) Press the SET key to confirm your selection.
Turning auto radiai
on and off
©
If you are sending a fax automatically {see Sending a fax in this
chapter) you can set up the machine to redial the number
automatically if the destination number is engaged. The unit will
redial the last used number up to 3 times at 5-minute intervals.
- The initial setting is "ON".
1) Press the FUNCTiON key. Then press the 5 key on the number
keys.
5 . U S E R O P T I O N S
P R E S S S E T K E Y
lV-1-10